The sample interface that comes with Products on Demand (PoD) highlights the capabilities of the technology through a few tools that allow you to define, create, and export information products on demand.
There are two methods for product creation, Custom Product and Fixed Product.
Changing display settings
You can change all supported Maritime Chart Service Display settings before exporting your product.
- Click the Change display properties button
to open the Display Settings window. - Change either your Depth Contour (Meters) or Miscellaneous properties and see your display change based on the new values.
All display property changes will be reflected on your exported product.
Adding layers
You can add layers to a map in any of the following ways:
- Search ArcGIS Online or ArcGIS Enterprise.
- Enter a URL.
- Load local files.
Note:
The added layers will be exported in a PDF file. You need to sign in to your ArcGIS Enterprise account to add content from your organization.
- Click the Add Data button
.The data pane appears.
- Choose one of the following methods to begin adding data:
- Click the Search tab, then enter the data in the Search... field. You can further refine your search by clicking the Type drop-down arrow and the Relevance drop-down arrow.
Note:
Click the Within map toggle button
to choose layers from within the map. For layers outside the scope of the map area, click the Within map toggle button 
once to turn it red. - Click the URL tab, and type the desired information in the URL field. You can further refine your search by clicking the An ArcGIS Server Web Service drop-down arrow. Click Add.
- Click the File tab and browse through files you want to add locally.
Note:
Shapefiles in ZIP, CSV, GPX, GeoJSON, and KML format are supported in ArcGIS Online.
- Click the Search tab, then enter the data in the Search... field. You can further refine your search by clicking the Type drop-down arrow and the Relevance drop-down arrow.
- Click the Layer list button
.The layer you added from the URL tab will be visible in the Layers pane.
- Optionally click the Layers button
at the bottom of the Add Data pane, then click the Remove Layer button 
next to a chosen layer to remove it from the list. - Click Back to return to the main pane.
Turning layers on and off
The Layer List pane provides a list of operational layers and their symbols, and allows you to turn individual layers on and off. Each layer in the list has a check box that allows you to control its visibility. You can also set the transparency of each layer.
The order in which layers appear in the Layer List pane corresponds to the layer order in the map. This pane provides functionality allowing you to change the order of layers in the map.
The visibility, transparency, and order of the layers set in the Layer List pane will be reflected on your exported product.
Note:
Only the layers that are turned on will be exported in the PDF file.
- Click the Layer list button .
The Layers pane appears.
- Click the options button next to the chosen layer, and choose from one from the following options:
- Zoom to—Sets the map extent to the extent of the layer.
- Transparency—Sets the transparency for the layer.
- Enable pop-up/ Disable pop-up—Enables or disables the pop-up for the feature layer. If a feature layer does not have a pop-up configured in the map, clicking Enable pop-up shows all field values for the feature layer.
- Hide/ Show labels—For hiding or showing labels for feature layers.
- Move up—Moves the layer one level up.
- Move down—Moves the layer one level down.
- Description—Opens the service description or the item details page for the service or the item associated with the layer if available.
- Click the Control All Layers button
.You can turn the layers on/off, or expand and collapse them.
- Optionally press Ctrl and click the check box next to any of the layers simultaneously, to turn the layers on or off in the same level.
- Optionally press Ctrl and click the drop-down arrow next to any of the layers simultaneously.
This expands or collapses layers in the same level.
- Click the Search button
to find a specific layer from the layers list.
Caution:
Layers in the list are disabled if you zoom out of their visible range.
Defining and creating a Custom Product
The following steps guide you through defining and creating custom products with PoD.
- Pan and Zoom to the area where you want to create a new product.
- Click the Define a Product button
.If necessary, click the Custom Product tab.
- Define the Scale of the product with a numeric value.
- Click the Page Size drop-down arrow and choose a size.
- Click the Orientation drop-down arrow and choose Portrait or Landscape.
- Click the Create a new extent button
. - Move the pointer so that it is centered over the location where you want to create the new product.
- Click on the map to create a new product extent.
A new extent is inserted into the map, and is added to the Export Queue.
Moving a Custom Product
After inserting a new extent, you may want to adjust its location. To adjust the position of your product extent, you can use the Move custom extent tool.
- Click the Move custom extent button
.Note:
Fixed product areas of interests can't be moved.
- Move the pointer over the area of interest (AOI) on the map.
- Click and drag to move the AOI.
Note:
If you have two or more overlapping custom AOIs, choose the product in the Export Queue first. If necessary, click Move an extent to move the AOI.
Creating a Fixed Product
Areas of interest (AOIs) for fixed products have predefined paper size for a specific location and scale. Locations of available fixed products will appear in the map when a scale is chosen from the drop-down menu.
Note:
The Fixed Products tab may not be available in the Print Properties pane. It must be enabled in the product configuration.
The following steps guide you through creating a Fixed Product with PoD.
- Pan and Zoom to the area where you want to select a new product.
- Click the Define a Product button .
If necessary, click the Fixed Product tab.
- Select the scale of the product you want from the Scale drop-down.
Areas of interest appear on the map.
Tip:
If you can't see the grid because of other map symbols, click the Change display properties button
to open the Display Settings pane and turn off Data extents. - Click the Select an extent button .
- Move the pointer over the grid and click Select the product.
An extent is selected in the map and is added to the Export Queue.
Exporting a product
You can export one or multiple products created from the Export Queue list using the following steps.
- Click the Export products button
.The Export Queue window appears.
- If necessary, type a chart name in the text box.
- If there is more than one product in the export queue, choose the one you want to export.
Tip:
To choose multiple products, press the Ctrl key while you click the products you want to export from the Export Queue list.
Note:
If nothing in the Export Queue is chosen, all the products in the queue will be exported.
- Click the Export Products button
.The export process begins.
- Click Open to view your exported product in a new tab.
Note:
If you want to download your exported product, you must do so before exiting or refreshing the PoD website. The download link will not be accessible once the website is refreshed.
Deleting a product
You can delete one or multiple products by choosing them in the Export Queue window.
- Click the Export products button .
The Export Queue window appears.
- If there is more than one product in the Export Queue, choose the one you want to delete.
Tip:
To choose multiple products, press Ctrl while you click the products you want to delete from the Export Queue.
- Click the Delete button
.Tip:
You can also press Delete on your keyboard to remove a chosen product.
- Click OK.
The product is deleted.